Enrolled

    Top 20 NEC Violations /Grounding and Bonding- 10 Hours

    When: February 26, 2019, 12:30pm-5:30pm ~ February 27, 8am-1pm (Lunch & Coffee included)
    Cost: $325
    Hours: 10 Hours
    Where: Timonium Graduate Center- 2034 Greenspring Drive, Timonium-Lutherville, MD 21093
    Description: Approved for ceu's in MD, VA, DE and NC as well as PDH's for professional engineers. Marty developed this course from input of over a dozen electrical inspectors and state boards on the most common residential and commercial code violations in both frequency and severity. Detailed code analysis will be taught and applied for each of the top 20 violations. Join us for this countdown and guess which one you think is the top violation. The G & B portion will discuss services, feeders, branch circuits, transformers, generators, equipment grounding and much more.

    Register Now

    Enrolled

    Top 20 National Electrical Code Violations- 5 Hours

    When: February 26, 2019, 12:30pm-5:30pm
    Cost: $225
    Hours: 5 Hours
    Where: Timonium Graduate Center- 2034 Greenspring Dr, Timonium-Lutherville, MD 21093
    Description: Approved for ceu's in MD, VA, DE and NC as well as PDH's for professional engineers. Marty developed this course with input from over a dozen electrical inspectors and state boards on the most common residential and commercial code violations in both frequency and severity. Detailed code analysis and discussion will be taught and applied for each of the top 20 violations. Join us for this countdown and guess which one you think is the top violation.

    Register Now

    Enrolled

    Grounding and Bonding- 5 Hours

    When: February 27, 2019, 8am-1pm (Coffee and Lunch are included)
    Cost: $225 (Mike Holt G & B Book Included)
    Hours: 5 Hours
    Where: Timonium Graduate Center- 2034 Greenspring Dr, Timonium-Lutherville, MD 21093
    Description: Approved for ceu's in MD, VA, DE and NC as well as PDH's for professional engineers. The G & B portion will discuss services, feeders, branch circuits, transformers, generators, equipment grounding and much more. Article 250 and other relevant grounding articles and topics will be covered.

    Register Now

    Enrolled

    Arc Flash/70E Electrical Safety & Understanding the 2017 NEC- 10 Hours

    When: March 26, 2019, 12:30pm-5:30pm ~ March 27, 8am-1pm (Lunch and coffee are included)
    Cost: $325.00 Coffee and lunch included on the 27th
    Hours: 10 Hours
    Where: 702 N. Main Street, Mount Airy, MD, 21771 (Mr Airy Fire Dept)
    Description: *Approved for ceu's in MD (all counties,including Cecil), VA, Delaware and North Carolina. Arc Flash Training Wallet Cards and Certificates Will Be Given Out At The Conclusion Of The Class. The purpose of this seminar is to keep workers safe and minimize the risk while working on or near energized electrical equipment. The course will help companies and workers comply with OSHA 1910 Subpart S, OSHA 1926 Subpart K and NFPA 70E standards. Reducing liability concerns and providing safe working environments and conditions is the primary focus. The NEC course will cover the most important NEC articles and sections mainly from chapters 1-4. Health care areas in article 517 will be discussed.

    Register Now

    Enrolled

    Arc Flash/NFPA 70E Electrical Safety Training- 5 Hours

    When: March 26, 2019, 12:30pm-5:30pm
    Cost: $225
    Hours: 5 Hours
    Where: 702 N. Main Street, Mount Airy, MD, 21771 (Mt Airy Fire Dept)
    Description: The purpose of this seminar is to keep workers safe and minimize the risk while working on or near energized electrical equipment. The course will help companies and workers comply with OSHA 1910 Subpart S, OSHA 1926 Subpart K and NFPA 70E standards. Reducing liability concerns and providing safe working environments and conditions is the primary focus. *Approved for ceu's in MD (all counties,including Cecil), VA, Delaware and North Carolina. Arc Flash Training Wallet Cards and Certificates Will Be Given Out At The Conclusion Of The Class.

    Register Now

    Enrolled

    Understanding the 2017 National Electrical Code (5 Hours)

    When: March 27, 2019, 8am-1pm~ Lunch and coffee are included
    Cost: 225.00 (Includes a Mike Holt Book $65 Value)
    Hours: 5 Hours
    Where: 702 N. Main Street, Mount Airy, MD, 21771
    Description: Approved for Continuing Education- Harford, PG, Cecil, Queen Anne, Wicomico, Caroline, Dorchester Counties,as well as Maryland, Virginia, Delaware and North Carolina This course will cover the most important NEC articles and sections mainly from chapters 1-4. Health care areas in article 517 will be discussed.

    Register Now

    Enrolled

    Electric Vehicle Supply Equipment

    When: March 28, 2019, 11am-2pm
    Cost: $85 (Lunch is Included)
    Hours: 2.5
    Where: BGE, 7225 Windsor Boulevard, Woodlawn, MD 21244
    Description: Marty is teaching this class pro bono through the Electric League of MD. Course includes lunch and 2.5 hours of ceu's approved for the state of MD and all counties that require ceu's. This course will cover the electrical conductors and equipment external to an electric vehicle including the installation of equipment and devices related to the electric vehicle:

    Register Now

    Enrolled

    Top 20 NEC Violations / Grounding and Bonding- 10 Hours

    When: April 1, 2019, 12:30pm - 5:30, and April 2, 8am-1pm
    Cost: $325.00 (Includes Mike Holt's Grounding & Bonding, 2017 ($65 value), Coffee and lunch included on April 2.
    Hours: 10 Hours
    Where: 2021-G Pulaski Highway, Havre de Grace, MD, 21078- Ground Floor at Harford
    Description: Approved for ceu's in MD, VA, DE and NC as well as PDH's for professional engineers. Marty developed this course from input of over a dozen electrical inspectors and state boards on the most common residential and commercial code violations in both frequency and severity. Detailed code analysis will be taught and applied for each of the top 20 violations. Join us for this countdown and guess which one you think is the top violation. The G & B portion will discuss services, feeders, branch circuits, transformers, generators, equipment grounding and much more. Article 250 and other relevant grounding articles will be covered.

    Register Now

    Enrolled

    Top 20 National Electrical Code Violations- 5 Hours

    When: April 1, 2019, 12:30pm-5:30pm
    Cost: $225
    Hours: 5
    Where: 2021-G Pulaski Highway, Havre de Grace, MD, 21078- Ground Floor at Harford
    Description: Approved for ceu's in MD, VA, DE and NC as well as PDH's for professional engineers. Marty developed this course from input of over a dozen electrical inspectors and state boards on the most common residential and commercial code violations in both frequency and severity. Detailed code analysis will be taught and applied for each of the top 20 violations. Join us for this countdown and guess which one you think is the 'top violation'. 

    Register Now

    Enrolled

    Grounding and Bonding- 5 Hours

    When: April 2, 2019, 8am-1pm (Lunch is provided)
    Cost: 225.00 (Includes a Mike Holt Book $65 Value)
    Hours: 5 Hours
    Where: 2021-G Pulaski Highway, Havre de Grace, MD, 21078- Ground Floor at Harford
    Description: Approved for continuing education in Maryland, Virginia, Delaware and NC, including Cecil, Queen Anne's, Harford, Dorchester, Caroline, Wicomico, Worcester, & PG Counties. Also approved for PDH's for professional engineers. This course will cover articles 250, including grounding and bonding requirements for services, feeders, branch circuits, transformers, generators, and much more.

    Register Now

    Enrolled

    Fire Alarm Systems- 5 Hours

    When: April 3, 2019, 12:30pm-5:30pm.
    Cost: $225.00
    Hours: 5 Hours
    Where: Owings Mills, MD- 10711 Red Run Blvd, Suite 110, Owings Mills, MD 21117
    Description: Hot Topics: Permits/Design Documents: Submittal Requirements & Common Mistakes Where fire alarm systems are required: Governing Codes (IBC, NFPA 101) & Installation Standards Requirements for fire alarm systems from Governing Codes New Emerging Technology Major changes to NFPA 72 Rules and Requirements for Access Controls National Electrical Code requirements Q & A All attendees will receive a certificate at the completion of the seminar. Course approved for ceu's for the state of MD (including all counties), Virginia, Delaware and North Carolina. PDH's approved for professional engineers in MD

    Register Now

    Enrolled

    NEC Electrical Calculations & Master Exam Prep Course (30 Hours)

    When: April 15, 17, 22, 24, 29, May 1, 6, 8, 13. All classes are held on Mondays and Wednesdays from 5pm-8:20pm.
    Cost: $695
    Hours: 30 (Total, 9 classes)
    Where: 3545 Ellicott Mills Dr, Ellicott City, MD 21043 (Park in the lower parking lot)
    Description: All posted dates are for this 30 hour course. This course will cover calculations for branch circuits, feeders, motors, single and multi-family dwellings, commercial properties, stores, voltage drop, fault current, demand factors, neutral loads, calculations based on square footage, transformers, generators, track lighting, show window, appliances, etc. Proven test taking techniques and strategies are taught, which are necessary to pass the exam. Calculations for this class contain solid and proven exam prep instruction. Approved for Continuing Education in Maryland and Harford, PG, Queen Anne, Wicomico, Caroline, Cecil, Dorchester & Worcester Counties. Contact PSI Exams for candidate registration info for MD, VA & DC.

    Register Now

    Enrolled

    Generators & Emergency Systems (10 Hours)

    When: April 18, 2019, 12:30pm-5:30pm & April 19, 8am-1pm (Lunch and coffee is included)
    Cost: $325
    Hours: 10
    Where: 10711 Red Run Blvd, Suite 110, Owings Mills, MD 21117
    Description: Approved for ceu's in Maryland (all counties), Virginia, Delaware and North Carolina. Also, professional engineers PDH's. This course will teach and train attendees about the 2017 NEC requirements and applicable building codes for generators, fire pumps, fire alarm, health care and their emergency system design and installation requirements.

    Register Now

    Enrolled

    Understanding The 2017 National Electrical Code (10 Hours)

    When: May 21, 2019, 12:30pm-5:30pm & May 22, 8am-1pm (lunch and coffee is included on the 22nd)
    Cost: $325 (Includes Lunch on the 22nd) (coffee and tea available both days)
    Hours: 10 Hours
    Where: Hampton Inn, College Park/Greenbelt: 9670 Baltimore Ave, College Park, MD 20740
    Description: Approved for continuing education in Cecil, Queen Anne's, Harford, Dorchester, Worcester, Caroline, Wicomico, & PG Counties as well as Maryland, Delaware, Virginia, and North Carolina. This course covers an in depth study of the 2017 NEC. Real life and relevant electrical code articles will be taught and discussed in detail along with question and answer sessions. Use the code book more effectively. You will understand major changes to the NEC, understand and use the tables, navigate through the code quicker and with more confidence. It is recommended to bring your 2017 NEC code book.

    Registration Coming Soon

    Enrolled

    Session 1- Understanding The 2017 National Electrical Code (5 Hours)

    When: May 21, 2019, 12:30pm-5:30pm (Coffee and tea available all day)
    Cost: 225.00
    Hours: 5 Hours
    Where: Hampton Inn, College Park/Greenbelt: 9670 Baltimore Ave, College Park, MD 20740
    Description: Approved for continuing education in Cecil, Queen Anne's, Harford, Dorchester, Worcester, Caroline, Wicomico, & PG Counties as well as Maryland, Delaware, Virginia, and North Carolina. This course covers an in depth study of the 2017 NEC, chapters 1-3. Real life and relevant electrical code articles will be taught and discussed in detail along with question and answer sessions. Use the code book more effectively. You will understand major changes to the NEC, understand and use the tables, navigate through the code quicker and with more confidence.

    Registration Coming Soon

    Enrolled

    Session 2- Understanding the 2017 National Electrical Code (5 Hours)

    When: May 22, 2019, 8am-1pm (Lunch and morning coffee is provided)
    Cost: $225.00 (Lunch and morning coffee is provided)
    Hours: 5 Hours
    Where: Hampton Inn, College Park/Greenbelt: 9670 Baltimore Ave, College Park, MD 20740
    Description: Approved for continuing education in Maryland, Delaware, Virginia, and North Carolina as well as Cecil, Queen Anne's, Harford, Dorchester, Worcester, Caroline, Wicomico, & PG Counties. Course is approved for Professional Engineer PDH's. This course will carefully cover the most important and relevant code sections as well as the changes in the 2017 NEC, chapters 4-7. Join us for this professionally developed and presented code course

    Registration Coming Soon

    Enrolled

    UNDERSTANDING THE 2017 NATIONAL ELECTRICAL CODE (10 Hours)

    When: June 5, 2019, 3pm-8pm, June 6, 8am-1pm (Dinner included on the 5th ~ Coffee and Lunch included on the 6th)
    Cost: $225.00
    Hours: 10
    Where: 110 Vincit St, Centreville, MD 21617 (County Office Permit Building)
    Description: Approved for continuing education in Cecil, Queen Anne's, Harford, Dorchester, Worcester, Caroline, Wicomico, & PG Counties as well as Maryland, Delaware, Virginia, and North Carolina. Course is approved for Professional Engineer PDH's. This course will carefully cover the most important and relevant code sections as well as the major changes in the 2017 NEC. Join us for this professionally developed and presented code course.

    Register Now

    Enrolled

    Session 1-Understanding The 2017 National Electrical Code (5 Hours)

    When: June 5, 2019. 3pm-8pm
    Cost: 225.00 (Dinner is provided)
    Hours: 5 Hours
    Where: 110 Vincit St, Centreville, MD 21617 (Vincit County Office Building)
    Description: Approved for continuing education in Cecil, Queen Anne's, Harford, Dorchester, Worcester, Caroline, Wicomico, & PG Counties as well as Maryland, Delaware, Virginia, and North Carolina. Course is approved for Professional Engineer PDH's. This course will carefully cover the most important and relevant code sections as well as the changes in the 2017 NEC, chapters 1-3. Join us for this professionally developed and presented code course.

    Register Now

    Enrolled

    Session 2- Understanding The 2017 National Electrical Code (5 Hours)

    When: June 6, 2019, 8am-1pm (Lunch is provided)
    Cost: 225.00 (Coffee and lunch is provided)
    Hours: 5 Hours
    Where: 110 Vincit St, Centreville, MD 21617 (Vincit County Office Building)
    Description: Approved for continuing education in Cecil, Queen Anne's, Harford, Dorchester, Worcester, Caroline, Wicomico, & PG Counties as well as Maryland, Delaware, Virginia, and North Carolina. This course covers an in depth study of the 2017 NEC, chapters 4-7. Real life and relevant electrical code articles will be taught and discussed in detail along with question and answer sessions. Use the code book more effectively. You will understand major changes to the NEC, understand and use the tables, navigate through the code quicker and with more confidence.

    Register Now

    Enrolled

    Understanding The 2017 National Electrical Code (10 Hours)

    When: June 11, 2019, 12:30pm-5:30pm and June 12, 8am-1pm
    Cost: $325.00 (coffee and lunch included on the 12th)
    Hours: 10 Hours
    Where: 255 Clifton Blvd, Westminster, MD 21157 (Enter through main front door. Classroom is to the right)
    Description: Approved for continuing education in Cecil, Queen Anne's, Harford, Dorchester, Worcester, Caroline, Wicomico, & PG Counties as well as Maryland, Delaware, Virginia, and North Carolina. This course covers an in depth study of the 2017 NEC. Real life and relevant electrical code articles will be taught and discussed in detail along with question and answer sessions. Use the code book more effectively. You will understand major changes to the NEC, understand and use the tables, navigate through the code quicker and with more confidence.

    Register Now

    Enrolled

    Session 1-UNDERSTANDING THE 2017 NATIONAL ELECTRICAL CODE (5 Hours)

    When: June 11, 2019, 12:30pm-5:30pm
    Cost: $225.00
    Hours: 5
    Where: 255 Clifton Blvd, Westminster, MD 21157 (Enter through main front door. Classroom is to the right)
    Description: Approved for continuing education in Cecil, Queen Anne's, Harford, Dorchester, Worcester, Caroline, Wicomico, & PG Counties as well as Maryland, Delaware, Virginia, and North Carolina. Course is approved for Professional Engineer PDH's. This course will carefully cover the most important and relevant code sections as well as the changes in the 2017 NEC, chapters 1-3. Join us for this professionally developed and presented code course.

    Register Now

    Enrolled

    SESSION 2- UNDERSTANDING THE 2017 NATIONAL ELECTRICAL CODE (5 HOURS)

    When: June 12, 2019, 8am-1pm (Coffee and lunch included)
    Cost: $225.00
    Hours: 5 Hours
    Where: 255 Clifton Blvd, Westminster, MD 21157 (Enter through main front door. Classroom is to the right)
    Description: Approved for continuing education in Cecil, Queen Anne's, Harford, Dorchester, Worcester, Caroline, Wicomico, & PG Counties as well as Maryland, Delaware, Virginia, and North Carolina. PDH's approved for MD professional Engineers. This course covers an in depth study of the 2017 NEC, chapters 4-7. Real life and relevant electrical code articles will be taught and discussed in detail along with question and answer sessions. Use the code book more effectively. You will understand major changes to the NEC, understand and use the tables, navigate through the code quicker and with more confidence.

    Register Now

Cancellation Policy: For a full refund, a written request must be received in writing at least 10 days before class begins. There will be no refunds for no shows.